Aqui esta el Firmware : (Requiere registro de usuario)
Código: Seleccionar todo
https://www.sammobile.com/firmwares/galaxy-j7-pop/SM-J727P/SPR/download/J727PVPU2AQI3/192059/
Download Odin v3.13.1
Extract the firmware file you just downloaded. You should get 5 files:
AP (System &Recovery)
BL (Bootloader)
CP (Modem / Radio)
CSC_*** (Country / Region / Operator)
HOME_CSC_*** (Country / Region / Operator)
Add each file to it's respective field in Odin v3.13.1.
Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data.
Reboot your phone in Download / Odin mode (make sure your device is off) with the following button combo:
POWER + VOLUME DOWN + BIXBY
Other options in case first option did not work or isn't possible.
Option 2
VOLUME DOWN + VOLUME UP than USB cable
Option 3
POWER + VOLUME DOWN + VOLUME UP
Option 4
POWER + VOLUME DOWN + HOME BUTTON
Option 5
(Note9) USB cable + VOLUME DOWN + BIXBY
Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a BLUE box will show up with the COM port number. (Be sure, the SAMSUNG-drivers are installed on your PC!)
Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot.
Click the start button, wait for Odin to say 'PASS' in a GREEN box.
Once the flash is complete, your phone will reboot, and you can disconnect your phone from the PC.